Kerbs & Stoppers

Kerb Ramp - 600 x 230 x 96 mm
£22.05

Kerb Ramp - 600 x 230 x 96 mm

£22.05

The 10040092 Kerb Ramp is designed to enable cars and wheel chair-users access to paved areas over kerbs approximately 100mm high. It is made from good quality rubber compound and it has been cored out to reduce the weight. Dimensions: 600 x 230 x 96 mm ..

Kerb Ramp - 610 x 1070 x 65mm high
£23.62

Kerb Ramp - 610 x 1070 x 65mm high

£23.62

The 10040096 is a wide kerb ramp that easily spans most entrance doors to give easy access for wheel chairs and sack trucks. Dimensions: 610 x 1070 x 65mm high ..

Kerb Ramp - 690 x 690 x 50 mm
£23.10

Kerb Ramp - 690 x 690 x 50 mm

£23.10

This kerb ramp is well suited to doorway access or kerbside access uses. It has a maximum working load of 200kg. 690 x 690 x 50 mm ..

Rubber Kerb - 1150 x 130 x 1200mm
£67.62

Rubber Kerb - 1150 x 130 x 1200mm

£67.62

The 10040097 Kerb is 1.2m long with 2 fixing plates and used primarily in HGV parks and Distribution Centres to help prevent tractor units and trailers from damaging walls, fences and buildings. Dimensions: 150 x 130 x 1200mm ..

Rubber Kerb - 150 x 130 x 3000 mm
£182.70

Rubber Kerb - 150 x 130 x 3000 mm

£182.70

This 10040099 Kerb is 3M with 4 fixing plates and used primarily in HGV parks and Distribution Centres to help prevent tractor units and trailers from damaging walls, fences and buildings. Dimensions: 150 x 130 x 3000 mm ..

Rubber Kerb - 160 x 125 x 1650mm
£36.75

Rubber Kerb - 160 x 125 x 1650mm

£36.75

The 10040095 is a competitively priced rubber kerb with 8 yellow chevrons attached for better visibility. This part can be fixed with M12 fixings. Recess in fixing hole only 20mm so fixings need to be at least 200mm long. Dimensions: 160 x 125 x 1650mm ..

Rubber Kerb - 550 x 150 x 100mm
£9.55

Rubber Kerb - 550 x 150 x 100mm

£9.55

The 10040098 is a small competitively priced rubber kerb with 3 yellow chevrons on each 500mm side. Dimensions: 550 x 150 x 100mm ..

Rubber Kerb - 710 x 145 x 100mm high
£20.54

Rubber Kerb - 710 x 145 x 100mm high

£20.54

The 10040100 Kerb is made from Tyre Cord, an extremely tough rubber compound reinforced with synthetic fibres. Able to withstand the toughest environments Dimensions: 710 x 145 x 100mm high ..

Rubber Kerb Moulding 900mm x 150mm x 95mm
£25.30

Rubber Kerb Moulding 900mm x 150mm x 95mm

£25.30

The 10040051 Kerb is a medium, high visibility, rubber kerb for car and light goods vehicle parks. They work especially well , one per parking bay, in front of buildings to avoid damage to either the vehicle or the building. Can be fixed into concrete with three M12 x 100 anchor fixings (10130023) or three M12 tarmac fixings (10130013). Dimensions: 900 x 150 x 95 mm ..

Rubber Kerb Stopper c/w Ground Fixing Plates
£98.45

Rubber Kerb Stopper c/w Ground Fixing Plates

£98.45

Natural/SBR Rubber Blend Kerb complete with 3 steel plates for ground fixing. Dimensions - 2000mm x 100mm x 100mm. Ideal for use in car parks to help prevent cars damaging expensive assets whilst manouvering. Dimensions: 100 x 100 x 2000 mm Use M12 tarmac bolts or M12 anchor bolts for fixing (available separately). ..

Rubber Kerb Stopper c/w Ground Fixing Plates. Heavy Duty
£110.14

Rubber Kerb Stopper c/w Ground Fixing Plates. Heavy Duty

£110.14

The 10040004 Kerb is available in 2m lengths with 3 fixing plates and used primarily in HGV parks and Distribution Centres to help prevent tractor units and trailers from damaging walls, fences and buildings. Can be supplied with highly reflective tape for an additional £10.00 per kerb.  ..

Tubular Steel Kerb Vehicle Stopper - 2500 x 170 mm
£250.05

Tubular Steel Kerb Vehicle Stopper - 2500 x 170 mm

£250.05

Fabricated steel kerb stopper. Overall dimensions 2500mm long, 170mm high. Fabricated using 117mm diameter tube with 5 welded base plates each measuring 250mm x 150mm with 4 x 16mm diameter fixing holes. The assembly is powder coated bright yellow to aid visibility and is supplied with black rubber end caps for a neat finish. A professional solution to prevent materials handling vehicles damaging expensive assets and buildings. Dimensions: 2500 x 170 mm ..

Tubular Steel Kerb Vehicle Stopper - 610 x 200 x 100mm high
£51.45

Tubular Steel Kerb Vehicle Stopper - 610 x 200 x 100mm high

£51.45

The 10040094 steel kerb is ideal for stopping cars, van and trucks from driving where they shouldn't. Good for car parks and trailer bays in logistics centres. This 89mm diameter tubular kerb is made from 5mm thick galvanised steel with yellow powder coating over. The two base plates are made from 10mm thick steel. The hole centres are approx 490mm apart. The two fixing holes are 19.2mm dia.  Use M16X125 through bolts for fixing. Dimensions: 610 x 200 x 100mm high ..