Loading Bay Dock Bumper Accessories

10mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 10 mm
£6.25

10mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 10 mm

£6.25

The 10020031 Packer is a 10mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 450 x 250 x 10 mm ..

15mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 15 mm
£12.20

15mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 15 mm

£12.20

The 10020032 Packer is a 15mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. This part can be supplied plain or with holes drilled to suit a particular bumper. Dimensions: 450 x 250 x 15 mm ..

15mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 15 mm
£16.67

15mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 15 mm

£16.67

The 10020036 Packer is a 15mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 750 x 250 x 15 mm ..

20mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 20 mm
£16.67

20mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 20 mm

£16.67

The 10020033 Packer is a 20mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. This packer can be supplied plain or with holes drilled to suit a particular bumper. Dimensions: 450 x 250 x 20 mm ..

20mm Rubber Packing Shim for Type 1818 Bumper - 450 x 450 x 15 mm
£27.09

20mm Rubber Packing Shim for Type 1818 Bumper - 450 x 450 x 15 mm

£27.09

The 10020035 Packer is a 15mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 450 x 450 x 15 mm ..

20mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 20 mm
£18.15

20mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 20 mm

£18.15

The 10020037 Packer is a 20mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 750 x 250 x 20 mm ..

50mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 50 mm
£18.15

50mm Rubber Packing Shim for Type 1810 Bumper - 450 x 250 x 50 mm

£18.15

The 10020034 Packer is a 50mm thick piece of rubber designed to allow adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 450 x 250 x 50 mm ..

50mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 50 mm
£31.26

50mm Rubber Packing Shim for Type 3010 Bumper - 750 x 250 x 50 mm

£31.26

The 10020038 Packer is a 50mm thick piece of rubber designed to allow fine adjustment for the projection dimension of the dock bumper whilst maintaining the dock bumpers ability to compress. Dimensions: 750 x 250 x 50 mm ..

Angle Bracket 250MM Use Back Plates for Overdock Protection
£50.49

Angle Bracket 250MM Use Back Plates for Overdock Protection

£50.49

This angle bracket allows standard back plate and dock bumper assemblies to be fixed 250mm above the dock height to prevent vehicles over-riding. Brackets are finished in yellow. Dimensions: 250 x 250 x 150 mm ..

Angle Bracket for Overdock Protection - 250 x 150 x 150 mm
£32.74

Angle Bracket for Overdock Protection - 250 x 150 x 150 mm

£32.74

This angle bracket allows standard back plate and dock bumper assemblies to be fixed 150mm above the dock height to prevent vehicles over-riding. Brackets are finished in either red oxide or grey primer. Two fixing holes are M24 threaded and two are 26mm dia clear holes. Dimensions: 250 x 150 x 150 mm ..

Back Plate - 450 x 250 x 15 mm
£50.51

Back Plate - 450 x 250 x 15 mm

£50.51

It is easier and quicker to replace damaged bumpers or studs fixed to a back plate compared to those fixed directly into concrete. This backplate has no galvanised coating so that it is better for welding to steel structures. The quoted price for this item excludes any fixings which can be purchased at extra cost, see our Fixings section. The back plate has 2 x M24 threaded holes to accommodate any of our 450mm rubber bumpers. There are also 4 holes for fixing the plate to the bay, 2 are 20mm dia and 2 are 28mm dia ( the larger holes are there to allow this part to be fitted with an angle bracket to take the backplate above the dock - see part 10020017 & 10020042 ). ..

Back Plate - 450 x 250 x 60 mm
£66.83

Back Plate - 450 x 250 x 60 mm

£66.83

The 10020048 Back Plate is a simple galvanised steel backing plate with returns to hold sacrificial front plates in various materials whilst remaining undamaged. Can be used in conjunction with 10020043 or 10020045. This backplate has 4 x M15 countersunk holes for fixing to the loading bay. ..

Back Plate - 470 x 270 x 120 mm
£89.11

Back Plate - 470 x 270 x 120 mm

£89.11

The 10020050 is the backing plate used in our 10010040 Dock Bumper. This backplate has 4 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ) and 2 at the bottom at 20mm dia. Dimensions: 470 x 270 x 120 mm ..

Back Plate - 470 x 270 x 80 mm
£74.27

Back Plate - 470 x 270 x 80 mm

£74.27

The 10020049 is the backing plate used in our 10010032 Dock Bumper. This backplate has 4 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ) and 2 at the bottom at 20mm dia. Dimensions: 470 x 270 x 80 mm ..

Back Plate - 750 x 250 x 15 mm
£72.78

Back Plate - 750 x 250 x 15 mm

£72.78

It is easier and quicker to replace damaged bumpers or studs fixed to a back plate compared to those fixed directly into concrete. This backplate has no galvanised coating so that it is better for welding to steel structures. The quoted price for this item excludes any fixings which can be purchased at extra cost, see our Fixings section. The back plate has 3 x M24 threaded holes to accommodate any of our 750mm rubber bumpers. There are also 6 holes for fixing the plate to the bay, 4 are 20mm dia and 2 are 28mm dia ( the larger holes are there to allow this part to be fitted with an angle bracket to take the backplate above the dock - see parts 10020017 & 10020042 ). Dimensions: 750 x 250 x 15 mm ..

Back Plate - 770 x 270 x 120 mm
£111.39

Back Plate - 770 x 270 x 120 mm

£111.39

The 10020052 is the backing plate used in our 10010041 Dock Bumper. This galvanised backplate has 6 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ), 2 half way down and 2 at the bottom 20mm dia. Dimensions: 770 x 270 x 120 mm ..

Back Plate - 770 x 270 x 80 mm
£89.11

Back Plate - 770 x 270 x 80 mm

£89.11

The 10020051 is the backing plate used in our 10010033 Dock Bumper. This backplate has 6 fixing holes... 2 at the top are 25mm dia to allow for M24 bolts to fix to an above dock angle bracket ( if required ), 2 half way down and 2 at the bottom 20mm dia. Dimensions: 770 x 270 x 80 mm ..

Back Plate for Type 75L Bumper - 750 x 400 x 100 mm
£81.86

Back Plate for Type 75L Bumper - 750 x 400 x 100 mm

£81.86

The 10020024 Back plate is used in conjunction with A008 Dock Bumper. This configuration helps to prevent damage from trailers that over-ride the dock, especially useful if you cannot use our standard backplate with angle bracket because the cladding of the building is too close to the edge of the dock. The cut out is 120mm wide x 265mm deep. Dimensions: 750 x 400 x 100 mm ..

Back Plate for Type 75R Bumper - 750 x 400 x 100 mm
£81.86

Back Plate for Type 75R Bumper - 750 x 400 x 100 mm

£81.86

The 10020025 Back plate is used in conjunction with 10010021 Dock Bumper. This configuration helps to prevent damage from trailers that over-ride the dock, especially useful if you cannot use our standard backplate with angle bracket because the cladding of the building is too close to the edge of the dock. The cut out is 120mm wide x 265mm deep. Dimensions: 750 x 400 x 100 mm ..

Back Plate with M24 Threaded Holes for Type 1810 Bumpers - 450 x 250 x 15 mm
£53.58

Back Plate with M24 Threaded Holes for Type 1810 Bumpers - 450 x 250 x 15 mm

£53.58

It is easier and quicker to replace damaged bumpers or studs fixed to a back plate compared to those fixed directly into concrete. The quoted price for this item excludes any fixings which can be purchased at extra cost, see our Fixings section. The back plate has 2 x M24 threaded holes to accommodate any of our 450mm rubber bumpers. There are also 4 holes for fixing the plate to the bay, 2 are 18mm dia and 2 are 27mm dia ( the larger holes are there to allow this part to be fitted with an angle bracket to take the backplate above the dock - see part 10020017 & 10020042). ..

Back Plate with M24 Threaded Holes for Type 3010 Bumpers - 750 x 250 x 15 mm
£72.93

Back Plate with M24 Threaded Holes for Type 3010 Bumpers - 750 x 250 x 15 mm

£72.93

It is easier and quicker to replace damaged bumpers or studs fixed to a back plate compared to those fixed directly into concrete. The quoted price for this item excludes any fixings which can be purchased at extra cost, see our Fixings section. The back plate has 3 x M24 threaded holes to accommodate any of our 450mm rubber bumpers. There are also 6 holes for fixing the plate to the bay, 4 are 18mm dia and 2 are 27mm dia ( the larger holes are there to allow this part to be fitted with an angle bracket to take the backplate above the dock - see part 10020017 & 10020042). Dimensions: 750 x 250 x 15 mm ..

Front Plate for Type 1818 L shaped Bumpers- 440 x 440 x 62 mm
£50.92

Front Plate for Type 1818 L shaped Bumpers- 440 x 440 x 62 mm

£50.92

This front plate has no side cheeks, just a rolled top edge to help protect the top of the bumper. Because it does not have the strengthening side cheeks it is not appropriate for use on sites with heavy traffic. Dimensions: 440 x 440 x 62 mm ..

Front Plate for Type 75L Bumper- 750 x 400 x 100 mm
£83.17

Front Plate for Type 75L Bumper- 750 x 400 x 100 mm

£83.17

The 10020026 Front Plate has 50mm side cheeks making it much stronger than a flat plate. The bumper behind it compresses to absorb the impact of a reversing trailer. This part fits our Rubber Dock Bumper 10010020 Dimensions: 750 x 400 x 100 mm ..

Front Plate for Type 75R Bumper - 750 x 400 x 100 mm
£83.17

Front Plate for Type 75R Bumper - 750 x 400 x 100 mm

£83.17

The 10020027 Front Plate has 50mm side cheeks making it much stronger than a flat plate. The bumper behind it compresses to absorb the impact of a reversing trailer. This part fits our Rubber Dock Bumper 10010021 Dimensions: 750 x 400 x 100 mm   ..

Front Plate with Side Cheeks for Type 16 Bumper - 415 x 215 x 62 mm
£59.41

Front Plate with Side Cheeks for Type 16 Bumper - 415 x 215 x 62 mm

£59.41

This front plate has 50mm side cheeks making it much stronger than a flat plate. The bumper behind it compresses to absorb the impact of a reversing trailer. Fits our Dock Bumper 10010004. Dimensions: 415 x 215 x 62 mm   ..

Front Plate with Side Cheeks for Type 1810 Bumpers - 440 x 250 x 62 mm
£59.41

Front Plate with Side Cheeks for Type 1810 Bumpers - 440 x 250 x 62 mm

£59.41

This front plate has 50mm side cheeks making it much stronger than a flat plate. The bumper behind it compresses to absorb the impact of a reversing trailer. Fits our Dock Bumper 10010003. Dimensions: 440 x 250 x 62 mm ..

Front Plate with Side Cheeks for Type 3010 Bumpers - 732 x 250 x 62 mm
£89.11

Front Plate with Side Cheeks for Type 3010 Bumpers - 732 x 250 x 62 mm

£89.11

This front plate is designed specifically for the A040 Front Plate. It has 50mm side cheeks making it much stronger than a flat plate. The bumper behind it compresses to absorb the impact of a reversing trailer. This part fits onto our Rubber Dock Bumper 10010007. Dimensions: 732 x 250 x 62 mm ..

Polyurethane Front Plate - 448 x 248 x 50 mm
£77.98

Polyurethane Front Plate - 448 x 248 x 50 mm

£77.98

The 10020044 Front Plate is the polyurethane front plate. It is extremely strong, bright yellow and will withstand continuous use. It can be easily removed and replaced if it becomes damaged. Due to low demand we make this part to order. Lead time is approx 6-8 weeks. Dimensions: 448 x 248 x 50 mm ..

Replacement Pad - 450 x 250 x 100mm
£32.68

Replacement Pad - 450 x 250 x 100mm

£32.68

The 10020054 is the rubber element of 10010016 UHMWPE Dock Bumper. Hole centres from each end are 100 + 250mm. Dimensions: 450 x 250 x 100mm ..

Replacement Pad - 750 x 250 x 100mm
£47.52

Replacement Pad - 750 x 250 x 100mm

£47.52

The 10020055 is the rubber element of 10010018 UHMWPE Dock Bumper. Hole centres from each end are 100mm + 275 + 275 Dimensions: 750 x 250 x 100mm   ..

Rubber Front Plate - 448 x 248 x 50 mm
£32.68

Rubber Front Plate - 448 x 248 x 50 mm

£32.68

The 10020043 Front Plate is the black wear resistant rubber front plate. It is tough, performs well under compression and will withstand continuous use. It can be easily removed and replaced if it becomes damaged. This part can be used in conjunction with 10010034, 10010032, 10010040 & 10020048. Dimensions: 448 x 248 x 50 mm ..

Rubber Front Plate - 750 x 250 x 50mm
£43.07

Rubber Front Plate - 750 x 250 x 50mm

£43.07

The 10020053 is a rubber moulding to be used as a cheaper option to the 10020046 UHMWPE Front plate. ..

Sliding Back Plate for Type 1810 Bumpers - 720 x 250 x 66 mm
£152.97

Sliding Back Plate for Type 1810 Bumpers - 720 x 250 x 66 mm

£152.97

A spring loaded back plate compatible with a selection of 450mm high dock bumpers. It allows the bumper to slide down as the trailer is loaded; returning when the trailer moves away. Dimensions: 720 x 250 x 66 mm ..

Sliding Back Plate for Type 3010 Bumpers - 965 x 250 x 66 mm
£175.26

Sliding Back Plate for Type 3010 Bumpers - 965 x 250 x 66 mm

£175.26

A spring loaded back plate compatible with a variety of 750mm high dock bumpers. It allows the bumper to slide down as the trailer is loaded; returning when the trailer moves away. Dimensions: 965 x 250 x 66 mm ..

Toe Protector
£83.17

Toe Protector

£83.17

The 10020056 Toe Protector is sold in pairs. They are made of galvanised steel and are fitted either side of the leveller to help prevent toes getting crushed as the leveller mechanism moves down. Dimensions: 1470 x 540(max) x 100mm(min) x 1.5mm thk ..

UHMW Poly Ethylene Front Plate - 450 x 250 x 50 mm
£86.14

UHMW Poly Ethylene Front Plate - 450 x 250 x 50 mm

£86.14

The 10020045 Front Plate is made from Ultra High Molecular Weight Poly Ethylene. It is highly visible, durable and has a very high friction co-efficient enabling the back of the trailer to slide along the face. Dimensions: 448 x 248 x 50 mm ..

UHMW Poly Ethylene Front Plate - 750 x 250 x 50 mm
£136.64

UHMW Poly Ethylene Front Plate - 750 x 250 x 50 mm

£136.64

The 10020046 Front Plate is made from Ultra High Molecular Weight Poly Ethylene. It is highly visible, durable and has a very high friction co-efficient enabling the back of the trailer to slide along the face. Dimensions: 750 x 250 x 50 mm ..

UHMWPE Front Plate - Type 1810 - 410 x 210 x 35mm
£53.47

UHMWPE Front Plate - Type 1810 - 410 x 210 x 35mm

£53.47

The 10020057 is the UHMWPE front plate to the 10010016 Dock Bumper Dimensions: 410 x 210 x 35mm thick ..

UHMWPE Front Plate - Type 3010 - 710 x 210 x 35mm
£59.41

UHMWPE Front Plate - Type 3010 - 710 x 210 x 35mm

£59.41

The 10020058 is the UHMWPE front plate to the 10010018 Dock Bumper. ..