Loading Bay Dock Bumpers

Rubber Dock Bumper/Fender - Type 11 - 330 x 250 x 100 mm
£21.17

Rubber Dock Bumper/Fender - Type 11 - 330 x 250 x 100 mm

£21.17

This is a small economical rubber dock bumper. It can be used on a dock leveler and is ideal for protecting steelwork around a loading dock. The 10010001 Dock Bumper has neither a back plate nor a front plate. Type - 11 Hole centres 180mm. Diameter of fixing hole : 19mm   Recess 50mm dia x 50mm depth Dimensions: 330 x 250 x 100  mm ..

Rubber Dock Bumper/Fender - 450 x 250 x 60 mm
£101.13

Rubber Dock Bumper/Fender - 450 x 250 x 60 mm

£101.13

The 10010034 Dock Bumper is a shallow dock bumper with a profile of only 60mm so the HGV can back in close to the loading dock. The sacrificial rubber front plate can be easily removed and replaced if it becomes damaged. Dimensions: 450 x 250 x 60 mm ..

Rubber Dock Bumper/Fender - Type 1810 - 450 x 250 x 100 mm
£28.28

Rubber Dock Bumper/Fender - Type 1810 - 450 x 250 x 100 mm

£28.28

A popular standard rubber dock bumper designed to protect a loading dock from reversing HGV's. It can be attached using a back plate and its life can be extended greatly if installed with a front plate. Also available in TPX Tyre compound, extremely tough, see 10010022. Dimensions: 450mm x 250mm x 100mm. Features 2 x 28mm diameter fixing holes. ..

Rubber Dock Bumper/Fender - Type 16 - 450 x 250 x 150 mm
£43.17

Rubber Dock Bumper/Fender - Type 16 - 450 x 250 x 150 mm

£43.17

An extended rubber dock bumper with 150mm of projection designed to better protect a loading dock. The life of this product can be extended greatly with a front plate. Dimensions: 450 x 250 x 150  mm Weight: 16  kg ..

Rubber Dock Bumper/Fender - Type 11 - Heavy Duty Reinforced Rubber - 330 x 250 x 100 mm
£22.32

Rubber Dock Bumper/Fender - Type 11 - Heavy Duty Reinforced Rubber - 330 x 250 x 100 mm

£22.32

This is a small economical rubber dock bumper made from highly resilient TPX tyre compound. It is ideal for protecting steelwork around a loading dock. There is no back or front plate for this item. Type - 11 Dimensions: 330 x 250 x 100 mm ..

Rubber Dock Bumper/Fender - Type 2410 - 600 x 250 x 100 mm
£46.14

Rubber Dock Bumper/Fender - Type 2410 - 600 x 250 x 100 mm

£46.14

A 600mm tall rubber dock bumper designed to protect a loading dock from repeated impact from reversing heavy goods vehicles. The 10010006 Dock Bumper has neither a back plate nor a front plate. Type - 2410 Dimensions: 600mm x 250mm x 100mm. Features 3 x recessed 22mm diameter fixing holes. ..

Rubber Dock Bumper/Fender - Type 3010 - 750 x 250 x 100 mm
£52.09

Rubber Dock Bumper/Fender - Type 3010 - 750 x 250 x 100 mm

£52.09

750mm dock bumpers prevent HGV's under-riding the bumper and ripping it off the wall. If they are installed with a bracket it is possible to prevent the delivery vehicle from over-riding as well. Also available in TPX Tyre compound, extremely tough, see 10010038. Type - 3010 Dimensions: 750mm x 250mm x 100mm. Features 3 x recessed 28mm diameter fixing holes. ..

Rubber Dock Bumper/Fender -Type 75L - 750 x 400 x 100 mm
£66.98

Rubber Dock Bumper/Fender -Type 75L - 750 x 400 x 100 mm

£66.98

The 10010020 is a large rubber dock bumper with maximum 400mm width x 470mm depth giving extra protection to the dock leveler and also an extra 280mm x 280mm above dock if supported by our back plate 10020024. Especially useful if the cladding behind the bumper comes close to the dock edge and is getting damaged. A front plate is also available 10020026. Type - 75L - Left Side Dimensions: 750 x 400 x 100 mm ..

Rubber Dock Bumper/Fender - Type 75R - 750 x 400 x 100 mm
£66.98

Rubber Dock Bumper/Fender - Type 75R - 750 x 400 x 100 mm

£66.98

A large rubber dock bumper with maximum 400mm width x 470mm depth giving extra protection to the dock leveler and also an extra 280mm x 280mm above dock if supported by our back plate 10020025 . Especially useful if the cladding behind the bumper comes close to the dock edge and is getting damaged. Type - 75R - Right Side Dimensions: 750 x 400 x 100 mm ..

Rubber Dock Bumper/Fender - L Shaped - 450 x 250 x 100 mm
£43.17

Rubber Dock Bumper/Fender - L Shaped - 450 x 250 x 100 mm

£43.17

This "L" shaped bumper gives extra protection along the top edge of the loading dock where other dock bumpers do not. The 10010005 Dock Bumper is the handed front plate for this bumper. There is no compatible back plate. Also available in TPX Tyre compound, extremely tough, see 10010037. ..

Rubber Dock Bumper/Fender - 330 x 305 x 100 mm
£30.19

Rubber Dock Bumper/Fender - 330 x 305 x 100 mm

£30.19

This is a small rubber dock bumper made from highly resilient TPX tyre compound. Unusually it has 4 fixing holes. It is ideal for protecting steelwork around a loading dock. There is no back or front plate for this item. Dimensions: 330 x 305 x 100 mm ..

Rubber Dock Bumper/Fender - Type 18 - Heavy Duty Reinforced Rubber - 450 x 250 x 100 mm
£40.18

Rubber Dock Bumper/Fender - Type 18 - Heavy Duty Reinforced Rubber - 450 x 250 x 100 mm

£40.18

The 10010022 Dock Bumper is a heavy duty popular size of bumper made from an extremely tough and long lasting TPX tyre compound. A design proven to protect a loading dock from repeated impacts. It is compatible with our back plate 10020015. Type - 18 Dimensions: 450 x 250 x 100 mm ..

Rubber Dock Bumper/Fender - 450 x 450 x 100 mm
£54.34

Rubber Dock Bumper/Fender - 450 x 450 x 100 mm

£54.34

The 10010037 Dock Bumper is identical to the  10010005 Dock Bumper but it is made from our extremely tough fibre filled TPX tyre compound. The L shape gives extra protection along the top edge of the loading dock. No back plate or front plate available for this bumper. Dimensions: 450 x 450 x 100 mm ..

Rubber Dock Bumper/Fender - Type 490 - Heavy Duty Reinforced Rubber - 490 x 80 x 90 mm
£20.83

Rubber Dock Bumper/Fender - Type 490 - Heavy Duty Reinforced Rubber - 490 x 80 x 90 mm

£20.83

The 10010023 Dock Bumper is a small bumper made from highly resilient TPX tyre compound. It is popular with European logistics companies on loading docks and HGV trailers. This bumper has 3 holes which require M12 fixing   Type - 490 Dimensions - 490mm x 80mm x 90mm ..

Rubber Dock Bumper/Fender - Type 45 - Heavy Duty Reinforced Rubber - 750 x 115 x 75 mm
£28.28

Rubber Dock Bumper/Fender - Type 45 - Heavy Duty Reinforced Rubber - 750 x 115 x 75 mm

£28.28

This is the narrowest bumper we make for loading dock applications. It is made from an extremely tough TPX tyre compound that is well suited to the task of protecting loading docks from reversing HGV's. This part requires 6 pces M12x120mm anchor fixings. Type - 45 Dimensions: 750 x 115 x 75 mm ..

Rubber Dock Bumper/Fender - 750 x 250 x 100 mm
£60.38

Rubber Dock Bumper/Fender - 750 x 250 x 100 mm

£60.38

Like the 10010007 Dock Bumper but made from our extremely tough TPX material. They prevent HGV's under-riding the bumper and if installed with a BRACKET it is possible to prevent over-riding. If they are installed with a bracket it is possible to prevent the delivery vehicle from over-riding as well. Dimensions: 750 x 250 x 100 mm ..

Rubber Dock Bumper/Fender - 450 x 230 x 50 mm
£18.85

Rubber Dock Bumper/Fender - 450 x 230 x 50 mm

£18.85

The A269 Dock Bumper is made from TyreCord compound (a blend of NAT/SBR rubber with synthetic fibres). It is extremely tough and much stronger than plain rubber. This bumper is only 50mm deep, thus allowing the unloading vehicle close to the loading bay. This bumper has 2 fixing holes 20mm diameter. Hole centres 224mm. Dimensions: 450 x 230 x 50 mm ..

Rubber Dock Bumper/Fender - 600 x 300 x 80 mm
£29.19

Rubber Dock Bumper/Fender - 600 x 300 x 80 mm

£29.19

The 10010047 Dock Bumper is made from TyreCord compound (a blend of NAT/SBR rubber with synthetic fibres). It is extremely tough and much stronger than plain rubber. This bumper is only 80mm deep, helpful if the leveller has a fixed length lip and you want more lip in the trailer. Dimensions: 600 x 300 x 80 mm VERY LIMITED STOCK!! ..

PE Dock Bumper/Fender - 450 x 250 x 60 mm
£101.13

PE Dock Bumper/Fender - 450 x 250 x 60 mm

£101.13

The 10010039 Dock Bumper is a shallow dock bumper with a profile of only 60mm so the HGV can back in close to the loading dock. The yellow polyurethane front plate can be easily removed and replaced if it becomes damaged. Dimensions: 450 x 250 x 60 mm ..

PE Faced Sliding Dock Bumper - Type 18 - 450 x 260 x 110 mm
£169.68

PE Faced Sliding Dock Bumper - Type 18 - 450 x 260 x 110 mm

£169.68

The 10010032 Dock Bumper has a large impact area with no holes in the face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. Compresses 11mm under 15 tonne load Type - 18 Dimensions: 450 x 260 x 110 mm ..

PE Faced Sliding Dock Bumper/Fender - 450 x 260 x 160 mm
£181.44

PE Faced Sliding Dock Bumper/Fender - 450 x 260 x 160 mm

£181.44

The 10010040 Dock Bumper has a large impact area with no holes in the face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. Dimensions: 450 x 260 x 160 mm ..

PE Faced Sliding Dock Bumper - Type 30 - 750 x 260 x 115 mm
£238.14

PE Faced Sliding Dock Bumper - Type 30 - 750 x 260 x 115 mm

£238.14

The 10010033 Dock Bumper has a large impact area with no holes in the face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. The last photo shows this part used in conjunction with part 10020017 Angle Bracket to help protect against trailers that over-ride the dock lev eller. Compresses 11mm under 15 tonne load Type - 30 Dimensions: 750 x 260 x 115 mm ..

PE Faced Sliding Dock Bumper/Fender - 750 x 260 x 160 mm
£273.58

PE Faced Sliding Dock Bumper/Fender - 750 x 260 x 160 mm

£273.58

The 10010041 Dock Bumper has a large impact area with no holes in the face plate for the back of the truck to snag on. The 50mm thick face can slide freely up and down in its steel cradle back plate. Dimensions: 450 x 250 x 60 mm ..

PE Dock Bumper/Fender - Type 1810 - 450 x 250 x 115 mm
£86.33

PE Dock Bumper/Fender - Type 1810 - 450 x 250 x 115 mm

£86.33

The 10010016 Dock Bumper is similar in many respects to the standard 450mm rubber dock bumper in terms of capability. This model however has a low friction co-efficient front plate made from 40mm thick ultra-high-molecular-weight-polyethylene. Dimensions: 450mm x 250mm x 115mm. Features 2 x recessed 27mm diameter fixing holes. The UHMWPE face is tough and none marking so is suitable in marine applications. ..

PE Dock Bumper/Fender - Type 3010 - 750 x 250 x 115 mm
£116.09

PE Dock Bumper/Fender - Type 3010 - 750 x 250 x 115 mm

£116.09

A020 Dock Bumper is similar in many respects to the standard 750mm rubber dock bumper. This model however has a low friction co-efficient front plate made from 40mm thick ultra-high-molecular-weight-polyethylene. Type - 3010 Dimensions: 750mm x 250mm x 115mm. Features 3 x recessed 27mm diameter fixing holes. The UHMWPE face is tough and none marking so is suitable in marine applications. ..

Laminated Rubber Dock Bumper/Fender - 900 x 250 x 100 mm
£136.93

Laminated Rubber Dock Bumper/Fender - 900 x 250 x 100 mm

£136.93

A time tested design that is still one of the best ways to protect a loading dock from damage caused by reversing trucks. It uses laminated rubber conveyor, edge on, which can take a lot of force without getting damaged. Dimensions: 900 x 250 x 100 mm This item currently has a lead time of 4 weeks ..

Laminated Rubber Dock Bumper/Fender - 600 x 250 x 100 mm
£92.27

Laminated Rubber Dock Bumper/Fender - 600 x 250 x 100 mm

£92.27

A time tested design that is still one of the best ways to protect a loading dock from damage caused by reversing trucks. It uses laminated rubber conveyor, edge on, which can take a lot of force without getting damaged. Dimensions: 600 x 250 x 100 mm This item currently has a lead time of 4 weeks ..

Laminated Rubber Dock Bumper/Fender 300 x 250 x 100 mm
£50.48

Laminated Rubber Dock Bumper/Fender 300 x 250 x 100 mm

£50.48

A time tested design that is still one of the best ways to protect a loading dock from damage caused by reversing trucks. It uses laminated rubber conveyor, edge on, which can take a lot of force without getting damaged. Dimensions: 300 x 250 x 100 mm ..

Heavy Duty Dock Bumper - Type 2 - 610 x 380 x 140 mm
£260.46

Heavy Duty Dock Bumper - Type 2 - 610 x 380 x 140 mm

£260.46

The 10010046 Dock Bumper is extremely tough. It is similar to a laminated bumper with the addition of a steel front plate fixed at the rear with elongated holes that allow the rubber to compress under pressure. Dimensions: 610 x 380 x 140 mm     ..

Heavy Duty Dock Bumper - Type 420 - 730 x 280 x 140 mm
£260.46

Heavy Duty Dock Bumper - Type 420 - 730 x 280 x 140 mm

£260.46

The 10010045 Dock Bumper is extremely tough. It is similar to a laminated bumper with the addition of a steel front plate fixed at the rear with elongated holes that allow the rubber to compress under pressure. Dimensions: 730 x 280 x 140 mm ..

Heavy Duty Dock Bumper - 960 x 586 x 200 mm
£267.34

Heavy Duty Dock Bumper - 960 x 586 x 200 mm

£267.34

The 10010042 Dock Bumper is an extremely large and robust dock bumper. It provides superior protection where HGV trailers override by a considerable height. Despite the steel construction compression is possible due to the rubber core. 7 fixing holes - takes M16 anchor bolts/studs. See our part A301 M16x125 anchor through bolt Dimensions: 960 x 586 x 200 mm   *made to order ..