The 10030032 Wheel Chock is a typical HGV chock. This model is made from solid yellow rubber compound. It has an integral moulded horizontal handle at the rear of the chock. Dimensions: 250 x 190 x 200 mm Max Load: 44 Tonnes Actual weight - 6kg ..
The 10030032 Wheel Chock is a very popular plastic HGV chock. This part is the largest we do for HGV vehicles and is very strong but light. A bracket is available to mount this chock onto a wall or on the trailer. The Plastic Wheel chock is manufactured according to DIN 76051-53 “Chocks for motor vehicles, semitrailers and towings” (Version November 1992) Dimensions: 460 x 200 x 220 mm Max Load: 44 Tonnes ..
The 10030036 Wheel Chock is made from wear resistant PU. It is tough but light weight so it can be easily carried by hand. Only available in high visibility red. Dimensions: 265 x 200 x 200 mm ..
The 10030037 Wheel Chock is made from wear resistant PU. It is tough but light weight so it can be easily carried by hand. Only available in high visibility red. Dimensions: 390 x 365 x 340 mm ..
High Fibre Tyrecord Rubber. Dimensions: 250mm x 185mm x 200mm..
The 10030040 Wheel Chock is designed to chock large diameter truck/dumper/digger wheels. This part is one of the largest chocks we stock. Moulded with a 16mm diameter hole through for rope or bar with eyebolt. Dimensions: 300 x 300 x 245mm high Max Load: 40 Tonnes ..
The 10030041 Wheel Chock was designed in response to feedback from fire fighters attending RTI's. This car and truck chock has restricted height for emergency teams to chock damaged vehicles involved in road traffic incidents and similar situations. The extra large eye-bolt is easy to grip and is useful for operatives wearing thick gloves. Dimensions: 235 x 160 x 140 mm Max Load: 44 Tonnes ..
The 10030023 Wheel Chock is a small automotive to medium LGV chock. This model is cored out on the sides to reduce weight and make the part cheaper. The moulding is made entirely of yellow rubber compound and is not a black rubber part painted yellow. This part has an integral vertical moulded handle at the rear of the chock. Dimensions: 270 x 120 x 185mm Max Load: 10 Tonnes ..
The 10030039 is a small wheel chock that can also be used to chock rolls of paper, steel, etc. Supplied in 1M lengths this product can be cut to length to suit various applications. Dimensions: 157 x 72 x 1000 mm ..
The 10030035 Pump Truck Stop is a useful moulding designed to stop pump trucks from rolling around and damaging the insides of panel vans, rigid HGV and HGV trailers. The rear wheels are just rolled up one side and into a four sided well. Dimensions: 545 x 300 x 80 mm ..
The 10030038 is an eyebolt used in our Wheel Chock A135. Dimensions: 200 mm long : 490mm ID eyebolt ..
Supersized wheel chock for use on wheeled earth moving machinery. Produced from moulded black rubber. Overall dimensions 330mm x 440mm x 260mm high. PLEASE NOTE: this product weighs 25Kgs so please handle with care. Only 44 units left ..
Natural/SBR Rubber Blend - Dimensions - 230mm x 200mm x 150mm High..
10030034 Wheel Chock Accessory is specifically to secure the 10030033 Wheel Chock and thus save storage space. It can be attached to the bodywork of any truck or trailer. It is as rugged as the chock itself. Dimensions: 170 x 155 x 333 mm ..
Wall mountable holster for storing wheel chocks on site. Manufactured from mild steel plate and powder coated in yellow for protection and high visibility. Approximate dimensions 205mm x 220mm x 115mm. Wheel chock shown in photograph is not included and for illustration purposes only. This holster is suitable for the following wheel chocks 10030002 10030003 10030022 10030023 10030024 10030032 10030041 ..
Natural/SBR Rubber Blend - Dimensions - 295mm x 150mm x 190mm High..
Moulded plastic wheel chock for use with your car. Ideal for use with cherished cars which are stored over winter enabling the parking brake to be left off. Overall dimensions 190mm x 105mm x 125mm high...
The 10030001 Wheel Chock is a small rubber chock that is ideal for car trailers and caravans. It has a chunky tread for excellent grip and a blue polypropylene rope handle. It is light and small enough to be stored easily. Dimensions: 174 x 90 x 94 mm Max Load: 1000 kg ..
Natural/SBR Rubber Blend - Dimensions - 235mm x 160mm x 205 mm high featuring hollow underside for reduced weight...
Natural/SBR Rubber Blend - Dimensions - 230mm x 160mm x 205mm high. ..
Steel Chain to help prevent wheel chock theft or misplacement - Dimensions - 3000mm length..
Steel Chain to help prevent wheel chock theft or misplacement - Dimensions - 5000mm length..
Steel Assembly. Dimensions: N/A..
124 Bamford Road, Inkersall, Chesterfield, Derbyshire
© 2017 MGF Site Solutions Ltd t/a SamiProducts.com | Co No: 9405997 | VAT: 215 9376 93